Thomson 19HU5253, 19HU5253C 19HU5253W 19HU5253CW

(Our category: TV / Projector Remote)

Replacement Remote Control. No setup is required. All you need to do is to insert two batteries and it is ready to use. Long battery life; remote goes into very low power sleep mode when not in use.

This remote works on the Thomson 19HU5253, 19HU5253C 19HU5253W 19HU5253CW only.

You will be able to access the important setup menus and also;
  • eco
  • guide
  • info
  • lang
  • list
  • option
  • source
  • source
  • text
  • zoom
  • zoom

  • We do have a Thomson page where you can view all 3m remote controls for Freeview, Dtv, Freesat, Television and DVD. Guaranteed same business day postage right up to 5pm. See our feedback on ebay in corner below. 1st class post - small packet that will fit through your letterbox.

    Thomson 19HU5253

    Remote Control : Thomson 19HU5253


    Notes on the functions:

    9,channel/select nine

    9,channel/select nine

    0,zero number entry for channels 10 20 30 ..

    menu, use to set item up - install channels and change picture settings etc

    8,channel/select eight

    Chapter 1
    Important information
    Ensure that your domestic mains supply voltage matches the voltage indicated on the identifica
    tion sticker located at the back of your set. Where the mains plug or an appliance coupler is 
    used as disconnect device, the disconnect device shall remain readily operable. On certain mod
    els, the light indicator is located at the side of the TV set. The absence of a light indicati
    on at the front does not mean that the TV set is fully disconnected from the mains. To disconn
    ect the TV set completely, the mains plug must be pulled out. The TV set's components are sens
    itive to heat. The maximum ambient temperature should not exceed 35 Celsius. Do not cover the
     vents at the back or sides of the TV set. Leave sufficient space around it to allow adequate 
    ventilation. Install the appliance away from any source of heat (fireplace, ...) or appliances
     creating strong magnetic or electric fields. Moisture in rooms where the set is installed sho
    uld not exceed 85  humidity. Apparatus shall not be exposed to dripping or splashing and no ob
    jects filled with liquids, such as vases, shall be placed on the apparatus. Moving the set fro
    m a cold place to a warm one can cause condensation on the screen (and on some components insi
    de the TV set). Let the condensation evaporate before switching the TV set on again. WARNING T
    o prevent the spread of fire, keep candles or other open flames away from this product at all 
    times. The or POWER/ button on the TV set or the button on the remote control can be used to s
    witch it on and put it into standby mode. If you are not going to be watching the TV for a len
    gthy period of time, switch it off completely by removing the plug from the mains power socket
    . During thunderstorms, we recommend that you disconnect the TV set from the mains and aerial 
    so that it is not affected by electrical or electromagnetic surges that could damage it. For t
    his reason, keep the mains and aerial sockets accessible so they can be disconnected, if neces
    sary. Unplug the TV set immediately if you notice it giving off a smell of burning or smoke. Y
    ou must never, under any circumstances, open the TV set yourself, as you run the risk of an el
    ectric shock in doing so. performance of your product.
    Getting started
    Use a glass-cleaning product to clean the screen and a soft cloth and mild detergent to clean 
    the rest of the set. Important: Using strong detergents, alcohol-based and abrasive products m
    ay damage the screen. Dust the vents at the back and sides regularly. Using solvents, abrasive
     or alcohol-based products could damage the TV set. If an object or liquid enters inside the a
    ppliance, unplug it immediately and have it checked by an authorized engineer. Never open the 
    appliance yourself since this may put you at risk or damage the appliance.
    Hanging the TV set on the wall
    Warning: This operation requires two people. To ensure a safe installation, observe the follow
    ing safety notes:  Check that the wall can support the weight of the TV set and wall mount a
    ssembly.  Follow the mounting instructions provided with the wall mount. For certain models,
     make sure to screw the hexagonal VESA wall mounting screw bosses (and screws) provided with t
    he set into the nuts for the wall mount at the back of your set before your wall mounting.  
    The TV set must be installed on a vertical wall.  Make sure to use only screws suitable for 
    the material of the wall.  Make sure that the TV set cables are placed so that there is not 
    danger of tripping over them. All other safety instructions about our TV sets are also applica
    ble here.
    Handling the TV set on the table
    Before setting up your television set, make sure that the surface you want to put the set on c
    an support its weight. Don't place the set on an unstable surface (e.g. moving shelf, very edg
    e of a unit) and make sure that the front of the television set does not overhang the surface 
    it is sitting on.
    TV screen
    The TV screen used in this product is made of glass. Therefore, it can break when the product 
    is dropped or impacted upon by other objects. The TV screen is a very high technology product,
     giving you finely detailed pictures. Occasionally, a few nonactive pixels may appear on the s
    creen as a fixed point of blue, green or red. This does not affect the
    This product is designed and manufactured with high quality materials and components which can
     be recycled and reused. This symbol means that electrical and electronic equipment, at their 
    end-of-life, should be disposed of separately from your household waste. Please, dispose of th
    is equipment at your local community waste collection/recycling centre. In the European Union 
    there are separate collection systems for used electrical and electronic product. Please, help
     us to conserve the environment we live in!
    EN 1
    Getting started
    To switch on TV after connecting power cord, press POWER/ . or
    TVNote: Position of power socket varies according to TV model. On certain models, you have to tu
    rn on the power switch first.
    DVD recorder
    OUT IN
    Note: Disconnect the power cord before connecting devices.
    Set-top box
    DVD player, home theatre system
    TVBlu-ray Disc player, headphones, HD game console & HD camcorder
    TVNotes: - Excessive sound pressure from earphones and headphones can cause hearing loss. - Numb
    er of HDMI may vary. - USB connector is for data input from USB storage devices.
    DVD player/ Home theatre system HD game console HD Camcorder
    Blu-ray Disc player
    PCTVPCOr use an HDMI connection.
    Note: Before connecting a PC, set the PC monitor refresh rate to 60Hz.
    Notes: - The figures are for representation only. - Not all connections available on all model
    s. - The location of the power socket on the TV may vary according to TV model. - The position
    s and names of the function buttons and connectors on the TV may vary according to TV model.
    EN 2
    Connect the power and antenna
    DVD recorder, cable receiver
    Getting started
    Remote control functions
    Most of your television's functions are available via the menus that appear on the screen. The
     remote control supplied with your set can be used to navigate through the menus and to config
    ure all the general settings.
    Source To select connected devices.
    unfreeze the picture in digital TV mode.
    Option To display the function menu to perform
    Standby / quit standby.
    0-9 To select a channel, page or setting. ECO To select desired power saving mode. Guide To to
    ggle the Electronic Programme
    certain operations; to display the Teletext page in different mode. to the previous menu in US
    B function.
    Return To return to the previous channel; to return V+/- To control the volume. Info To displa
    y programme information, if
    Guide on or off (only available for digital channels). previous menu.
    Menu To access the main menu; to return to the Exit To exit the menu structure or Teletext.
    Mute To switch the sound off and back on again. P+/- To change channels. TEXT To toggle Telete
    xt on or off. SUBTITLE To select a subtitle language available for
    To navigate in the main menu; to select menu options; to switch to the previous or next photo,
     song or video in USB function. To navigate in the main menu; to set /*Zoom+/- functions and c
    hange values.  can also be used to open the corresponding submenu. * To select the picture for
    mat. Note: You are recommended to use the full screen mode. Do not use the display mode with b
    lack bars on both sides of the picture (such as 4:3) for long time, otherwise the TV screen ma
    y be damaged permanently.
    OK To open the corresponding submenu and

    Terms of sale

    We have been in business since 1992. We also trade on ebay under the user name GenuineCopies:

    GenuineCopies (74221) Feedback