Panasonic PT-AE900U

(Our category: TV / Projector Remote)

Replacement Remote Control. No setup is required. All you need to do is to insert two batteries and it is ready to use. Long battery life; remote goes into very low power sleep mode when not in use.

This remote works on the Panasonic PT-AE900U only.

You will be able to access the important setup menus and also;
  • aspect - picture size
  • auto setup
  • ccm
  • computer
  • d zoom
  • d zoom
  • freeze
  • index window
  • main
  • menu
  • normal
  • picture mode
  • pc
  • std
  • shutter
  • video

  • We do have a Panasonic page where you can view all 3m remote controls for Freeview, Dtv, Freesat, Television and DVD. Guaranteed same business day postage right up to 5pm. See our feedback on ebay in corner below. 1st class post - small packet that will fit through your letterbox.

    Panasonic PT-AE900U

    Remote Control : Panasonic PT-AE900U

    13.99


    Notes on the functions:

    k_dn,adjusts the width of the picture at the bottom to account for the angle of projection (widen)

    menu, use to set item up - install channels and change picture settings etc

    ^,up for menu item selection - may also do channel+

    exit,go back or get out of the menu

    memory,use to store channel in the memory




    RLCD Projector
    Operating Instructions
    Model No.
    PT-AE900U
    Before operating this product, please read the instructions carefully and save this manual for
     future use.
    For assistance, please call : 1-888-View-PTV(843-9788) or send e-mail to : consumerproducts@pa
    nasonic.com or visit us at www.panasonic.com (U.S.A) For assistance, please call : 787-750-430
    0 or visit us at www.panasonic.co.jp/global/ (Puerto Rico)
    TQBJ 0182
    ENGLISH
    Dear Panasonic Customer:
    This instruction booklet provides all the necessary operating information that you might requi
    re. We hope it will help you to get the most out of your new product, and that you will be ple
    ased with your Panasonic LCD projector. The serial number of your product may be found on its 
    bottom. You should note it in the space provided below and retain this booklet in case service
     is required. Model number: PT-AE900U Serial number:
    CAUTION: This equipment is equipped with a threepin grounding-type power plug. Do not remove t
    he grounding pin on the power plug. This plug will only fit a groundingtype power outlet. This
     is a safety feature. If you are unable to insert the plug into the outlet, contact an electri
    cian. Do not defeat the purpose of the grounding plug.
    Do not remove
    IMPORTANT SAFETY NOTICE
    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR M
    OISTURE. Power Supply: This LCD Projector is designed to operate on 100 V  240 V, 50 Hz/60 Hz
     AC, house current only. CAUTION: The AC power cord which is supplied with the projector as an
     accessory can only be used for power supplies up to 125 V, 7 A. If you need to use higher vol
    tages or currents than this, you will need to obtain a separate 250 V power cord. If you use t
    he accessory cord in such situations, fire may result.
    WARNING: This equipment has been tested and found to comply with the limits for a Class B digi
    tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasona
    ble protection against harmful interference in a residential installation. This equipment gene
    rates, uses and can radiate radio frequency energy and, if not installed and used in accordanc
    e with the instructions, may cause harmful interference to radio communications. However, ther
    e is no guarantee that interference will not occur in a particular installation. If this equip
    ment does cause harmful interference to radio or television reception, which can be determined
     by turning the equipment off and on, the user is encouraged to try to correct the interferenc
    e by one or more of the following measures:  Reorient or relocate the receiving antenna.  In
    crease the separation between the equipment and receiver.  Connect the equipment into an outl
    et on a circuit different from that to which the receiver is connected.  Consult the dealer o
    r an experienced radio/TV technician for help. FCC CAUTION: To assure continued compliance, us
    e only shielded interface cables when connecting to computers or peripheral devices. Any unaut
    horized changes or modifications to this equipment will void the users authority to operate. I
    f you use serial port to connect PC for external control of projector, you must use optional R
    S-232C serial interface cable with ferrite core. Any unauthorized changes or modifications to 
    this equipment will void the user's authority to operate.
    The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to aler
    t the user to the presence of uninsulated "dangerous voltage" within the product's enclosure t
    hat may be of sufficient magnitude to constitute a risk of electric shock to persons. The excl
    amation point within an equilateral triangle is intended to alert the user to the presence of 
    important operating and maintenance (servicing) instructions in the literature accompanying th
    e product.
    2-ENGLISH
    ENGLISH-3
    Preparation
    Declaration of Conformity Model Number: PT-AE900U Trade Name: Panasonic Responsible party: Pa
    nasonic Corporation of North America. Address: One Panasonic Way Secaucus New Jersey 07094 Tel
    ephone number: 1-888-View-PTV(843-9788) This device complies with Part 15 of the FCC Rules, Op
    eration is subject to the following two conditions: (1) This device may not cause harmful inte
    rference, and (2) this device must accept any interference received, including interference th
    at may cause undesired operation.
    IMPORTANT SAFETY NOTICE ...2 Precautions with regard to safety ...............................
    ..........6 Accessories ...............................10 Before use .........................
    .........11 Location and function of each part...........................................13
    Getting started
    Setting-up...................................18 Projection methods, Projector position, Projec
    tion distances, Setting up range using the lens shift function Connections....................
    ...........22 Connecting to video equipment, Connecting to equipment compatible with HDMI, Con
    necting to computer Preparation for the remote control unit..............................25
    Care and maintenance
    When the TEMP indicator and the LAMP indicator are illuminated...54 Cleaning and replacing the
     air filter ..............................56 Replacing the lamp unit ............57 Before cal
    ling for service..........60 Cleaning and maintenance .......61
    Basic operation
    Turning on the power................26 Turning off the power................28
    Useful functions
    Setting the aspect ratio.............30 Selecting the picture mode.......33 Turning on the but
    ton lights.....33 Retrieving the saved picture settings....................................34 
    Turning off the picture momentarily...34 Displaying the "PICTURE" menu.....35 Displaying the "
    ADVANCED MENU"...35 Using the Cinema Color Management function ............36
    Others
    Specifications ............................62 Appendix ....................................64 
    List of compatible signals, General arrangement of the "COLOR MANAGEMENT" menu, Using the SERI
    AL connector, Projection dimensions calculation methods Dimensions ...........................
    .....69 Trademark acknowledgements...70
    Adjustments and settings
    On-screen menus ......................40 Menu screens, Menu operation guide, Returning a setti
    ng to the factory default Adjusting the picture.................44 PICTURE MODE, CONTRAST,
    4-ENGLISH
    ENGLISH-5
    Preparation
    WARNING: Not for use in a computer room as defined in the Standard for the Protection of Elect
    ronic Computer/Data Processing Equipment, ANSI/NFPA 75.
    Contents
    Preparation
    BRIGHT, COLOR, TINT, SHARPNESS, COLOR TEMP., DYNAMIC IRIS, Noise Reduction(NR), CINEMA REALITY
    , TV-SYSTEM, ADVANCED MENU, MEMORY SAVE, MEMORY LOAD, SIGNAL MODE, Projecting sRGBcompatible p
    ictures Adjusting the position...............48 Horizontal position, Vertical position, DOT CL
    OCK, CLOCK PHASE, ASPECT, WSS, OVER SCAN, KEYSTONE, AUTO SETUP Changing the display language..
    .50 Option settings ..........................51 OSD, OSD DESIGN, OSD POSITION, AUTO SEARCH, B
    ACK COLOR, STARTUP LOGO, DESK/CEILING, FRONT/REAR, OFF TIMER, FAN CONTROL, LAMP POWER, LAMP RU
    NTIME
    Precautions with regard to safety
    WARNING
    If you notice smoke, strange smells or noise coming from the projector, disconnect the power c
    ord plug from the wall outlet. B Do not continue to use the projector in such cases, otherwise
     fire or electric shocks could result. B Check that no more smoke is coming out, and then cont
    act an Authorized Service Center for repairs. B Do not attempt to repair the projector yoursel
    f, as this can be dangerous. Do not install this projector in a place which is not strong enou
    gh to take the full weight of the projector. B If the installation location is not strong enou
    gh, it may fall down or tip over, and severe injury or damage could result. Installation work 
    (such as ceiling suspension) should only be carried out by a qualified technician. B If instal
    lation is not carried out correctly, there is the danger that injury or electric shocks may oc
    cur. If foreign objects or water get inside the projector, or if the projector is dropped or t
    he cabinet is broken, disconnect the power cord plug from the wall outlet. B Continued use of 
    the projector in this condition may result in fire or electric shocks. B Contact an Authorized
     Service Center for repairs. Do not overload the wall outlet. B If the power supply is overloa
    ded (for example, by using too many adapters), overheating may occur and fire may result. Do n
    ot remove the cover or modify it in any way. B High voltages can cause fire or electric shocks
    . B For any inspection, adjustment and repair work, please contact an Authorized Service Cente
    r. Clean the power cord plug regularly to prevent it from becoming covered in dust. B If dust 
    builds up on the power cord plug, the resulting humidity can damage the insulation, which coul
    d result in fire. Pull the power cord plug out from the wall outlet and wipe it with a dry clo
    th. B If not using the projector for an extended period of time, pull the power cord plug out 
    from the wall outlet.
    Do not do anything that might damage the power cord or the power cord plug. B Do not damage th
    e power cord, make any modifications to it, place it near any hot objects, bend it excessively
    , twist it, pull it, place heavy objects on top of it or wrap it into a bundle. B If the power
     cord is used while damaged, electric shocks, short-circuits or fire may result. B Ask an Auth
    orized Service Center to carry out any repairs to the power cord that might be necessary. Do n
    ot handle the power cord plug with wet hands. B Failure to observe this may result in electric
     shocks. Insert the power cord plug securely into the wall outlet. B If the plug is not insert
    ed correctly, electric shocks or overheating could result. B Do not use plugs which are damage
    d or wall outlet which are coming loose from the wall. Do not place the projector on top of su
    rfaces which are unstable. B If the projector is placed on top of a surface which is sloped or
     unstable, it may fall down or tip over, and injury or damage could result. Do not place the p
    rojector into water or let it become wet. B Failure to observe this may result in fire or elec
    tric shocks. Do not place liquid containers on top of the projector. B If water spills onto th
    e projector or gets inside it, fire or electric shocks could result. B If any water gets insid
    

    Terms of sale

    We have been in business since 1992. We also trade on ebay under the user name GenuineCopies:

    GenuineCopies (74221) Feedback