Christie LW25

(Our category: TV / Projector Remote)

Replacement Remote Control. No setup is required. All you need to do is to insert two batteries and it is ready to use. Long battery life; remote goes into very low power sleep mode when not in use.

This remote works on the Christie LW25 only.

You will be able to access the important setup menus and also;
  • computer
  • d zoom
  • d zoom
  • focus
  • focus
  • freeze
  • image
  • input1
  • input2
  • input3
  • keystone
  • keystone
  • keystone
  • lens shift
  • menu
  • no show
  • pwr-off
  • p timer
  • pwr-on
  • video
  • zoom
  • zoom

  • We do have a Christie page where you can view all 3m remote controls for Freeview, Dtv, Freesat, Television and DVD. Guaranteed same business day postage right up to 5pm. See our feedback on ebay in corner below. 1st class post - small packet that will fit through your letterbox.

    Christie LW25

    Remote Control : Christie LW25

    13.99


    Notes on the functions:

    zoom-,decrease the zoom level

    >,go right in menu / guide

    lens shift,move the lens up and down with built in motor

    v,go down in on screen menu

    pon,power on




    MODEL
    38-VIV212-01
     Projection lens is optional.
    User's Manual
    TO THE OWNER
    Before operating this projector, read this manual thoroughly and operate the projector properl
    y. This projector provides many convenient features and functions. Operating the projector pro
    perly enables you to manage those features and maintains it in better condition for a consider
    able time. Improper operation may result in not only shortening the product-life, but also pre
    vents malfunctions, fire hazard, or other accidents. If your projector seems to operate improp
    erly, read this manual again, check operations and cable connections and try the solutions in 
    the "Trouble-shooting" section at the end of this booklet. If the problem still persists, cont
    act the sales dealer where you purchased the projector or the service center.
    SAFETY PRECAUTIONS
    WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROJECTOR TO RAIN O
    R MOISTURE. G This projector produces intense light from the projection lens. Do not stare dir
    ectly into the lens. Eye damage could result. Be especially careful that children do not stare
     directly into the beam. G This projector should be set in the way indicated. If not, it may r
    esult in a fire hazard. G Take appropriate space on the top, sides and rear of the projector c
    abinet for allowing air circulation and cooling the projector. Minimum distance should be take
    n. If the projector is to be built into a compartment or similarly enclosed, the minimum dista
    nces must be maintained. Do not cover the ventilation slot on the projector. Heat build-up can
     reduce the service life of your projector, and can also be dangerous.
    SIDE and TOP
    20cm
    REAR
    50cm
    50cm
    50cm
    G Do not put any flammable object or spray can near the projector, hot air is exhausted from t
    he ventilation holes. G If the projector is not to be used for an extended time, unplug the pr
    ojector from the power outlet. READ AND KEEP THIS USER'S MANUAL FOR LATER USE.
    CAUTION
    RISK OF ELECTRIC SHOCK DO NOT OPEN
    CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEA
    BLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
    THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE U
    SER'S MANUAL WITH THIS UNIT.
    THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT 
    WITHIN THIS UNIT.
    2SAFETY INSTRUCTIONS
    All the safety and operating instructions should be read before the product is operated. Read 
    all of the instructions given here and retain them for later use. Unplug this projector from A
    C power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cl
    eaning. Follow all warnings and instructions marked on the projector. For added protection to 
    the projector during a lightning storm, or when it is left unattended and unused for long peri
    ods of time, unplug it from the wall outlet. This will prevent damage due to lightning and pow
    er line surges. This projector should be operated only from the type of power source indicated
     on the marking label. If you are not sure of the type of power supplied, consult your authori
    zed dealer or local power company. Do not overload wall outlets and extension cords as this ca
    n result in fire or electric shock. Do not allow anything to rest on the power cord. Do not lo
    cate this projector where the cord may be damaged by persons walking on it. Do not attempt to 
    service this projector yourself as opening or removing covers may expose you to dangerous volt
    age or other hazards. Refer all servicing to qualified service personnel. Unplug this projecto
    r from wall outlet and refer servicing to qualified service personnel under the following cond
    itions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled int
    o the projector. c. If the projector has been exposed to rain or water. d. If the projector do
    es not operate normally by following the operating instructions. Adjust only those controls th
    at are covered by the operating instructions as improper adjustment of other controls may resu
    lt in damage and will often require extensive work by a qualified technician to restore the pr
    ojector to normal operation. e. If the projector has been dropped or the cabinet has been dama
    ged. f. When the projector exhibits a distinct change in performance-this indicates a need for
     service. When replacement parts are required, be sure the service technician has used replace
    ment parts specified by the manufacturer that have the same characteristics as the original pa
    rt. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon 
    completion of any service or repairs to this projector, ask the service technician to perform 
    routine safety checks to determine that the projector is in safe operating condition.
    Do not expose this unit to rain or use near water... for example, in a wet basement, near a sw
    imming pool, etc... Do not use attachments not recommended by the manufacturer as they may cau
    se hazards. Do not place this projector on an unstable cart, stand, or table. The projector ma
    y fall, causing serious injury to a child or adult, and serious damage to the projector. Use o
    nly with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or 
    shelf mounting should follow the manufacturer's instructions, and should use a mounting kit ap
    proved by the manufacturers. An appliance and cart combination should be moved with care. Quic
    k stops, excessive force, and uneven surfaces may cause the appliance and cart combination to 
    overturn.
    Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insu
    re reliable operation of the equipment and to protect it from overheating. The openings should
     never be covered with cloth or other materials, and the bottom opening should not be blocked 
    by placing the projector on a bed, sofa, rug, or other similar surface. This projector should 
    never be placed near or over a radiator or heat register. This projector should not be placed 
    in a built-in installation such as a book case unless proper ventilation is provided. Never pu
    sh objects of any kind into this projector through cabinet slots as they may touch dangerous v
    oltage points or short out parts that could result in a fire or electric shock. Never spill li
    quid of any kind on the projector.
    3COMPLIANCES
    Federal Communication Commission Notice
    Note : This equipment has been tested and found to comply with the limits for a Class B digita
    l device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonabl
    e protection against harmful interference in a residential installation. This equipment genera
    tes, uses and can radiate radio frequency energy and, if not installed and used in accordance 
    with the instructions, may cause harmful interference to radio communications. However, there 
    is no guarantee that interference will not occur in a particular installation. If this equipme
    nt does cause harmful interference to radio or television reception, which can be determined b
    y turning the equipment off and on, the user is encouraged to try to correct the interference 
    by one or more of the following measures :  Reorient or relocate the receiving antenna.  Inc
    rease the separation between the equipment and receiver.  Connect the equipment into an outle
    t on a circuit different from that to which the receiver is connected.  Consult the dealer or
     an experienced radio/TV technician for help. Use of shielded cable is required to comply with
     class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications
     to the equipment unless otherwise specified in the instructions. If such changes or modificat
    ions should be made, you could be required to stop operation of the equipment. Model Number Tr
    ade Name Responsible party Address Telephone No. : 38-VIV212-01 : Christie : CHRISTIE DIGITAL 
    SYSTEMS, Inc. : 10550 Camden Drive Cypress, CA 90630 USA : (714) 236-8610
    AC POWER CORD REQUIREMENT
    The AC Power Cord supplied with this projector meets the requirement for use in the country yo
    u purchased it.
    AC Power Cord for the United States and Canada :
    AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories 
    (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-t
    ype AC line plug. This is a safety feature to be sure that the plug will fit into the power ou
    tlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into t
    he outlet, contact your electrician.
    GROUND
    THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
    4TABLE OF CONTENTS
    FEATURES AND DESIGN PREPARATION
    NAME OF EACH PART OF PROJECTOR SETTING-UP PROJECTOR
    CONNECTING AC POWER CORD LENS INSTALLATION POSITIONING PROJECTOR ADJUSTABLE FEET MOVING PROJEC
    TOR
    6 7
    7 8
    8 9 9 10 10
    COMPUTER MODE
    SELECTING INPUT SOURCE SELECTING COMPUTER SYSTEM PC ADJUSTMENT
    AUTO PC ADJUSTMENT MANUAL PC ADJUSTMENT COMPATIBLE COMPUTER SPECIFICATIONS
    2020 20 21
    21 22 24
    PICTURE IMAGE ADJUSTMENT
    IMAGE LEVEL SELECT IMAGE LEVEL ADJUSTMENT
    2525 26
    PICTURE SCREEN ADJUSTMENT
    28

    Terms of sale

    We have been in business since 1992. We also trade on ebay under the user name GenuineCopies:

    GenuineCopies (74221) Feedback